当前位置:首页  >  产品中心  >    >  其它仪器仪表  >  NTP1-HPC211摩托车排气分析仪、 摩托车排气检测仪
型号:NTP1-HPC211

摩托车排气分析仪、 摩托车排气检测仪

描述:分体式结构,操作方便,按新标GBl9758-2005要求研制;
  采用内置式取样,用测量摩托车急加速、怠速况时的烟度;
  亮度数码显示,口关键零件组装而成

  • 厂商性质

    生产厂家
  • 更新时间

    2024-04-17
  • 访问量

    375
产品分类PRODUCT

我们相信好的产品是信誉的保证!

相关文章ARTICLES

致力于成为更好的解决方案供应商!

详细介绍
品牌恒奥德

摩托车排气分析仪  摩托车排气检测仪 型号:NTP1-HPC211

主要能点:
  分体式结构,操作方便,按新标GBl9758-2005要求研制;
  采用内置式取样,用测量摩托车急加速、怠速况时的烟度;
  亮度数码显示,口关键零件组装而成;
  采用式耐温的殊取样探头,采样稳定、、方便;
  丌机预热时间10分钟,并自动调零;
  数据自动线性化处理,可显示不透光度N、光吸收系数K;
  出现故障时自动显示故障代码;
  附有自动时钟显示,内置打印机(RS—232或模拟接口联网)供选择。
主要参数:
 
 
 
 
 
 
 
 
 
 
测量范围              不透光度N:  0~
   光吸收系数K:0~90.65m-1
示值误差              ≤±2%
稳定性                自动校零,量矩漂移≤±1%/4h
分辨率                0.1%
响应时间              1S±0.1S
输出方式              LED(4位)显示,可附打印机,打印出5组急加速烟度、怠速
                      烟度、光吸收系数的zui大值及平均值,测试时间、日期等,
                      可附接口与计算机联网
环境条件              温度0~40℃,相对湿度≤90%
电源                  AC100-240V   50Hz 消耗率150VA
外形尺寸              控制箱:250mm(长)×310mm(宽)×170mm()
                      烟道箱:250mm(长)×170mm(宽)×170mm()
重量                  控制箱:4kg,烟道箱:5kg
 
Main Features:
Separated structural design, easy to operate, according to the new national standard GBl9758-2005 technical requirements for development.
With built-in full-flow sampling techniques, application-specific measurement of motorcycle hard phases of acceleration, idle condition when the smoke.
High-brightness digital display, import key components assembled.
Using a special full-flow high-temperature sampling probe, sampling a stable, accurate and convenient.
Ji machine warm-up time 10 minutes, and automatic zero adjustment.
Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K.
Fails automatically displays fault code.
With automatic clock display, built-in printer (RS-232 or analog interface network) for selection.
 
Main technical parameters:
Test Scope:No light transmission N: 0~ 
Light absorption coefficient K: 0~90.65 m-1
Shows the value error
≤ ± 2%
Stability:
Automatic zero, volume moments drift ≤ ± 1% / 4h
Resolution:
0.1%
Response Time:
1S ± 0.1S
Output Mode:LED (4-bit) display can be attached to the printer 5 groups hard phases   
of acceleration smoke, idle smoke, the light absorption coefficient of
the maximum and the average test time, date, etc., can be attached to
interface with the computer network
Environmental conditions
Temperature 0 ~ 40
, relative humidity ≤ 90%
Power
AC100-240V  50Hz Power consumption 150VA
Dimensions
Control Box: 250mm (length) × 310mm (width) × 170mm (H)
            Flue Box: 250mm (length) × 170mm (width) × 170mm (H)
Weight
Control box: 4kg, flue box: 5kg
 
www.51658042.com

北京恒奥德仪器仪表有限公司
:鹏
: /57196682 /57191006//


 

:hadgs2009@yahoo.cn


地址:北京市海淀区阜成路42号院6号C-211

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7