当前位置:首页  >  产品中心  >  专用仪器仪表  >  消解仪  >  NTP1-HPC601烟度计
型号:NTP1-HPC601

烟度计

描述:采用分式取样、柴油机加速、减速和稳速时均可测量烟度;
数据自动线性化处理,可显示不透光度N、光吸收系数K和对应滤纸式烟度值SF;

  • 厂商性质

    生产厂家
  • 更新时间

    2024-04-17
  • 访问量

    463
详细介绍
品牌恒奥德
主要能点:
     体化结构;
      采用分式取样、柴油机加速、减速和稳速时均可测量烟度;
      数据自动线性化处理,可显示不透光度N、光吸收系数K和对应滤纸式烟度值SF;
      亮度数码显示;
      采用“空气幕”保护光学系统免受污染;
      检测室自动恒温控制,可防冷凝而影响测试度; 
      附自动时间显示,可选配转速测量和油温测量;
      出现故障自动诊断显示所在单元;
      配内置打印机(或数字RS-232A接口或模拟接口)。
主要参数:

 

 

 
 
 
 
 
 
 
 
 
 
测量范围              不透光度N:0~(相当烟度值0~10FSN) 
   光吸收系数K:0~16.06m-1
示值误差              ≤±2%(测量值)
稳定性                自动校零,量矩漂移≤±1%/4h
重复性                重复误差≤±1%
分辨率                0.1%
输出方式              数字直读显示,可附打印机打印烟浓度(暗度)zui大值,测试
                      时间、日期等。可附接口与计算机联网
测量烟度温度          70℃(自动恒温),当温度误差≥±10%时,温度及错误示
                      灯亮
环境条件              温度0~40℃,相对湿度≤90%
电源                  AC100-240V 50Hz 消耗率150VA
外形尺寸(含支架)    160mm(深)×400mm(宽)×480mm() 
重量                  约8kg
 
Main Features:
Integrated Structural Design
Adopted a triage-type sampling technique, diesel engine acceleration, deceleration, and steady speed can be measured when the smoke
Linear automatic data processing, can be displayed opacity degrees N, light absorption coefficient K and the corresponding value of filter paper-type smoke SF
High-brightness digital display;
Use of "air curtain" technology to protect the optical system from pollution
Automatic detection of room temperature control, anti-condensation can affect the testing accuracy
Automatically attached to the time display, and optional speed measurement and oil temperature measurement
Show where the failure of automatic diagnosis unit;
Equipped with built-in printer (or digital RS-232A interface or analog interface)
 
Main technical parameters:
Test ScopeNo light transmission N:0 (equivalent to smoke value 0 ~ 10FSN)
Light absorption coefficient K0-16 .06 m-1 
Shows the value error
≤ ± 2% (measured value)
Stability
Automatic zero, volume moments drift ≤ ± 1% / 4h
Repeatability
Repeat the error ≤ ± 1%
Resolution
0.1%
Output Mode
Digital direct-reading shows that smoke concentrations can be attached
printer (dark degrees) the maximum test time, date and so on. Can be
attached to interface with the computer network
Measurement of smoke temperature
70 (automatic constant temperature), when
the temperature error of ≥ ± 10%, the temperature and the error
indicator light
Environmental conditions
Temperature 0 ~ 40
, relative humidity ≤ 90%
Power
AC100-240V  50Hz Power consumption 150VA
Dimensions (with stand)
160mm (depth) × 400mm (width) × 480mm (H)
Weight
About 8kg
 
www.51658042.com
产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7